6 - 1984 Ahlmann AS 12 Wheel Loader
Depot Deinze | Belgium
Wheeled Loaders and Shovels
€3,600.00
2 - 2017 Tsugami B0206E-III CNC Swiss-type automatic lathe
Mill | NL
Starting bid
Current bid
Final bid
€10,000.00
0
Bid
Bids
Highest bidder
Outbid
My last bid: €0.00 (Auto bid)
Share:
Product information
| Brand | Tsugami |
| Amount | 1 |
| Serial number | 21046A |
| Type | B0206E-III |
| Year | 2017 |
Machine Capacity;
Max. workpiece length: 210 mm (with guide bushing) / 80 mm (without guide bushing)
Max. drilling capacity: M10 × 1.5
Max. tapping capacity: M10 × 1.5
Max. bar diameter: Ø20 mm
Max. drill chuck diameter: Ø8 mm
Max. milling diameter: M8 × 1.25
Max. threading capacity: M5 × 0.8
Hour meter reading: 23,338
Secondary spindle;
Max. drilling capacity: M6
Max. tapping capacity: M6
Main spindle;
Max. spindle speed: 200–12,000 r/min
Guide bush: Guide bush with oil supply (pull-type)
Nominal oil flow: 6,000 ml/min
Machine;
Tool holders (max.): 25 positions
Feed/stroke;
Rapid traverse: 32 m/min
X1-axis travel: 42 mm
Y1-axis travel: 72.5 mm
Z1-axis travel: 65 mm
Motors;
Main spindle motor: 2.2 / 3.7 kW
Sub-spindle motor: 1.5 / 2.2 kW
X1/X2 axis: 0.5 kW
Y1/Y2 axis: 0.5 kW
Z1/Z2 axis: 0.5 kW
Coolant pump: 0.75 kW
Lubricating oil pump: 0.3 kW
Control system: Fanuc Series 32i-MODEL B
Connected load: 12 kVA
Compressed air connection: 0.4 MPa
Machine dimensions: 1,635 × 1,635 × 1,700 mm
Equipped with: Chip conveyor, Mitec OMK PF 11 TF0M filter.
Combination
This lot is part of a combination: Combination B | CNC Swiss-type automatic lathe with automatic bar feeder (lots 2 & 9)
Machine Capacity;
Max. workpiece length: 210 mm (with guide bushing) / 80 mm (without guide bushing)
Max. drilling capacity: M10 × 1.5
Max. tapping capacity: M10 × 1.5
Max. bar diameter: Ø20 mm
Max. drill chuck diameter: Ø8 mm
Max. milling diameter: M8 × 1.25
Max. threading capacity: M5 × 0.8
Hour meter reading: 23,338
Secondary spindle;
Max. drilling capacity: M6
Max. tapping capacity: M6
Main spindle;
Max. spindle speed: 200–12,000 r/min
Guide bush: Guide bush with oil supply (pull-type)
Nominal oil flow: 6,000 ml/min
Machine;
Tool holders (max.): 25 positions
Feed/stroke;
Rapid traverse: 32 m/min
X1-axis travel: 42 mm
Y1-axis travel: 72.5 mm
Z1-axis travel: 65 mm
Motors;
Main spindle motor: 2.2 / 3.7 kW
Sub-spindle motor: 1.5 / 2.2 kW
X1/X2 axis: 0.5 kW
Y1/Y2 axis: 0.5 kW
Z1/Z2 axis: 0.5 kW
Coolant pump: 0.75 kW
Lubricating oil pump: 0.3 kW
Control system: Fanuc Series 32i-MODEL B
Connected load: 12 kVA
Compressed air connection: 0.4 MPa
Machine dimensions: 1,635 × 1,635 × 1,700 mm
Equipped with: Chip conveyor, Mitec OMK PF 11 TF0M filter.
