1 - 2014 Volvo EC220DL crawler excavator
Nyköping (1 hour from Stockholm) | Sweden
Tracked Excavators
€4,600.00
Opens
Verifying
Now closing!
Closed
1009 - Hitachi Seiki VS40 CNC milling machine
Åskvädersgatan 2, 418 34 Göteborg | SE
2
Bid
Bids
Highest bidder
Outbid
My last bid: SEK0.00 (Auto bid)
Share:
Product information
| Brand | Hitachi seiki |
| Amount | 1 |
| Serial number | 40009 |
| Type | VS40 |
| Year | 1990 |
Table Size: 850 mm × 550 mm
Maximum Table Load: 350 kg
toolholder size: BT40
Spindle Speed: 120 – 12,000 RPM
Tool magazine Capacity: 30 tools
Control system: SEICOS Σ18M
Equipped with: tooling, 3d measuring probe, FSE chip conveyor, mercatus cooling unit
X-Axis travel: 600 mm
Y-Axis travel: 450 mm
Z-Axis travel: 450 mm
Rapid Traverse X/Y-axis: 40m/min
Rapid Traverse Z-axis: 30m/min
Cutting Feed Rate: up to 15m/min
Machine Dimensions LxWxH: approx. 2300x2400x2680 mm
Machine Weight: approx. 7,300 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 9, 96, 225.
Important information
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Table Size: 850 mm × 550 mm
Maximum Table Load: 350 kg
toolholder size: BT40
Spindle Speed: 120 – 12,000 RPM
Tool magazine Capacity: 30 tools
Control system: SEICOS Σ18M
Equipped with: tooling, 3d measuring probe, FSE chip conveyor, mercatus cooling unit
X-Axis travel: 600 mm
Y-Axis travel: 450 mm
Z-Axis travel: 450 mm
Rapid Traverse X/Y-axis: 40m/min
Rapid Traverse Z-axis: 30m/min
Cutting Feed Rate: up to 15m/min
Machine Dimensions LxWxH: approx. 2300x2400x2680 mm
Machine Weight: approx. 7,300 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 9, 96, 225.
Pickup according to schedule - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Sweden)
Pickup according to schedule - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Sweden)
Pickup according to schedule - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Sweden)
