720 - 2009 Atomtex AT6130 radiation meter
Nijkerk | Netherlands
Measuring instruments - Various Measuring Tools
€10.00
115 - Zenith C.A.T.3+ radio detection
Nyköping (1 hour from Stockholm) | SE
Starting bid
Current bid
Final bid
€10.00
0
Bid
Bids
Highest bidder
Outbid
My last bid: €0.00 (Auto bid)
Share:
Product information
| Brand | Zenith |
| Amount | 1 |
| Buy amount | 1 |
| Serial number | 10/63-ENG-7353 |
| Type | C.A.T.3+ |
Modes of Operation:
Power Mode: Detects loaded power cables.
Radio Mode: Detects VLF radio signals re-radiated by buried metallic pipes/cables.
Genny Mode (G): Detects specific signals applied to a conductor by the Genny3 transmitter.
AvoidanceScan™ Mode: Allows concurrent searching in P, R, and G modes for faster surveys.
Depth Measurement: When paired with a Genny3/4 transmitter, the C.A.T3+ can measure the depth of the detected utility.
StrikeAlert™: Warns of shallow buried cables by flashing an icon on the display.
Performance: Enhanced signal processing for better pinpointing of utilities and fast response times
Genny3/4 Transmitter: Used for applying a specific signal to a pipe or cable.
Signal Clamp (e.g., 215mm or 100mm): Allows the Genny to safely apply a signal to a live cable or pipe without interrupting the supply.
Live Plug Connector: Applies the Genny signal directly to a live power socket.
Sonde (33kHz): A self-contained transmitter used for tracing non-metallic pipes or ducts
Modes of Operation:
Power Mode: Detects loaded power cables.
Radio Mode: Detects VLF radio signals re-radiated by buried metallic pipes/cables.
Genny Mode (G): Detects specific signals applied to a conductor by the Genny3 transmitter.
AvoidanceScan™ Mode: Allows concurrent searching in P, R, and G modes for faster surveys.
Depth Measurement: When paired with a Genny3/4 transmitter, the C.A.T3+ can measure the depth of the detected utility.
StrikeAlert™: Warns of shallow buried cables by flashing an icon on the display.
Performance: Enhanced signal processing for better pinpointing of utilities and fast response times
Genny3/4 Transmitter: Used for applying a specific signal to a pipe or cable.
Signal Clamp (e.g., 215mm or 100mm): Allows the Genny to safely apply a signal to a live cable or pipe without interrupting the supply.
Live Plug Connector: Applies the Genny signal directly to a live power socket.
Sonde (33kHz): A self-contained transmitter used for tracing non-metallic pipes or ducts
