1 - 2014 Trumpf TruLaser 5030 (L56) 5kW fiber laser cutting machine
Bubikon | Switzerland
combination1+2 | Metalworking - Laser cutting machines
CHF5,000.00
Opens
Verifying
Now closing!
Closed
1004 - 2003 Mori Seiki Hitec CH250 Multi operation lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
1
Bid
Bids
Highest bidder
Outbid
My last bid: SEK0.00 (Auto bid)
Share:
Product information
| Brand | Mori seiki hitec |
| Amount | 1 |
| Serial number | CH250CCD0009 |
| Type | CH250 |
| Year | 2001 |
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 67 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 40 tools (2 × 20)
Tool Holder Type: KV4540
Control System: Fanuc series 18i
Equipped with: Absolent ab oil mist filter, enomoto chip conveyor, coolant filter, documentation
X-axis Travel: 600 mm
Z-axis Travel: 1,000 mm
Y-axis Travel: ±75 mm
B-axis travel: 858 mm
C1/C2-axis: 0.001° increments
X/Z-axis: 30 m/min
Y-axis: 15 m/min
Machine Weight: 8000 kg
Dimensions LxWxH: 3300x1930x2290mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 4, 254-261.
Additional information
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 67 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 40 tools (2 × 20)
Tool Holder Type: KV4540
Control System: Fanuc series 18i
Equipped with: Absolent ab oil mist filter, enomoto chip conveyor, coolant filter, documentation
X-axis Travel: 600 mm
Z-axis Travel: 1,000 mm
Y-axis Travel: ±75 mm
B-axis travel: 858 mm
C1/C2-axis: 0.001° increments
X/Z-axis: 30 m/min
Y-axis: 15 m/min
Machine Weight: 8000 kg
Dimensions LxWxH: 3300x1930x2290mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 4, 254-261.
Pickup according to schedule - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Pickup according to schedule - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Pickup according to schedule - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Relevant lots
-
-
3 - 2009 Trumpf TruLaser Cell 7040 (L13) bed/tube laser cutting machine
Bubikon | Switzerland
combination 3+98 | Metalworking - Laser cutting machines
CHF5,000.00
-
/8-01.jpg)
8 - 2007 Tetra Pak TBA19/TBA 250 Base aseptic filling machine
Luleå | Sweden
B - Combination Line 2 (nr. 8-12) | Dairy processing - belt conveyors
€53,000.00