38 - 2015 CompAir DLT0704 air compressor
Grabs | Switzerland
Screw Air Compressors
CHF1,400.00
Opens
Verifying
Now closing!
Closed
3 - 2023 TIPPER TIE TT1815 Industrial Clipping Machine
Kingersheim | FR
42
Bid
Bids
Highest bidder
Outbid
My last bid: €0.00 (Auto bid)
Share:
Product information
| Brand | TIPPER TIE |
| Amount | 1 |
| Serial number | 4901.377.073 |
| Type | TT1815 |
| Year | 2023 |
Double casing clipping machine with touchscreen control panel
Calibration range: diameter 35–140 mm (depending on casing material)
Maximum cycle rate: up to 130 cycles/min (manufacturer’s specification)
Power consumption: 5.5 kW
Power supply: 400–480 V, 50–60 Hz, three-phase; optional 200–240 V
Rated current: 18 A
Compressed air required: 6–7 bar
Air consumption: max. 0.23 m³/min
Synchronous servomotor drive; electronic/pneumatic control
Protection rating: IP65
Operating temperature range: operation -10/+30 °C; storage +10/+50 °C
Permissible humidity: 5–95% at 25 °C, non-condensing
Approximate weight: approx. 500 kg net
Stainless steel construction
Visible double clip coil holder; feed table and product guide
Emergency stop button and illuminated controls provided
Compressed air connection and clip tools visible
Estimated dimensions: ~160 × 115 × 190 cm
Printed technical documentation provided (manual)
Includes Tipper Tie tool case
Important information
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Double casing clipping machine with touchscreen control panel
Calibration range: diameter 35–140 mm (depending on casing material)
Maximum cycle rate: up to 130 cycles/min (manufacturer’s specification)
Power consumption: 5.5 kW
Power supply: 400–480 V, 50–60 Hz, three-phase; optional 200–240 V
Rated current: 18 A
Compressed air required: 6–7 bar
Air consumption: max. 0.23 m³/min
Synchronous servomotor drive; electronic/pneumatic control
Protection rating: IP65
Operating temperature range: operation -10/+30 °C; storage +10/+50 °C
Permissible humidity: 5–95% at 25 °C, non-condensing
Approximate weight: approx. 500 kg net
Stainless steel construction
Visible double clip coil holder; feed table and product guide
Emergency stop button and illuminated controls provided
Compressed air connection and clip tools visible
Estimated dimensions: ~160 × 115 × 190 cm
Printed technical documentation provided (manual)
Includes Tipper Tie tool case
