3 - 2022 HANDTMANN VF 608 PLUS Stainless Steel Feeder
Villebon-sur-Yvette | Frankrijk
Combination | Complete Stainless Steel Food Processing Line (1,2,3) | Vleesvormpersen
€ 11.750,00
Delen
Productinformatie
| Merk | TIPPER TIE |
| Aantal | 1 |
| Jaar | 2023 |
| Serienummer | 4901.377.073 |
| Type | TT1815 |
Double casing clipping machine with touchscreen control panel
Calibration range: 35–140 mm in diameter (depending on casing material)
Maximum cycle rate: up to 130 cycles/min (manufacturer’s specification)
Connected load: 5.5 kW
Power supply: 400–480 V, 50–60 Hz, three-phase; optional 200–240 V
Rated current: 18 A
Compressed air required: 6–7 bar
Air consumption: max. 0.23 m³/min
Driven by a synchronous servomotor; electronic/pneumatic control
Protection rating: IP65
Operating temperature range: operation -10/+30 °C; storage +10/+50 °C
Permissible humidity: 5–95% at 25 °C, non-condensing
Approximate weight: approx. 500 kg net
Stainless steel construction
Visible dual clip coil holder; feed table and product guide
Emergency stop button and illuminated controls provided
Compressed air connection and clip tools visible
Estimated dimensions: ~160 × 115 × 190 cm
Printed technical documentation visible (manual)
Includes Tipper Tie tool case
Description generated using AI
Belangrijke informatie
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Double casing clipping machine with touchscreen control panel
Calibration range: 35–140 mm in diameter (depending on casing material)
Maximum cycle rate: up to 130 cycles/min (manufacturer’s specification)
Connected load: 5.5 kW
Power supply: 400–480 V, 50–60 Hz, three-phase; optional 200–240 V
Rated current: 18 A
Compressed air required: 6–7 bar
Air consumption: max. 0.23 m³/min
Driven by a synchronous servomotor; electronic/pneumatic control
Protection rating: IP65
Operating temperature range: operation -10/+30 °C; storage +10/+50 °C
Permissible humidity: 5–95% at 25 °C, non-condensing
Approximate weight: approx. 500 kg net
Stainless steel construction
Visible dual clip coil holder; feed table and product guide
Emergency stop button and illuminated controls provided
Compressed air connection and clip tools visible
Estimated dimensions: ~160 × 115 × 190 cm
Printed technical documentation visible (manual)
Includes Tipper Tie tool case
Description generated using AI
