1 - 2007 Mori Seiki NT3200 CNC lathe
Norsborg | Zweden
Combination 1, 108-111, 240, 462 | Metaalbewerking - CNC lathes
SEK 50.000,00
3 - 2019 DMG Mori CLX 350 CNC turning center
Rümlang | CH
Startbod
Huidig bod
Totaal aantal biedingen
€ 55.000,00
0
Bod
Biedingen
Hoogste bod
Overboden
Mijn laatste bod: € 0,00 (Automatisch bod)
Delen
Productinformatie
| Merk | DMG Mori |
| Aantal | 1 |
| Jaar | 2019 |
| Serienummer | 0030000601A |
| Type | CLX 350 |
Operating hours: 6355
Maximum turning Diameter: 320 mm;
Maximum turning Length: 440 mm;
X-Axis Travel: 185 mm;
Y-Axis Travel: +/- 40 mm;
Z1/Z3-Axis Travel: 465/550mm;
Number of sindels: 2;
Main Spindle type A2-6;
Sub spindle type A2-5;
Spindle Speed Range: Up to 5.000 rpm;
Spindle Power: 16.5 kW;
Main Spindle bore: 73mm;
Sub spindle bore: 45mm;
Number of Tool Stations: 12;
Tool shaft: VDI 30;
Driven tools: yes till 5.000 rpm;
Controle system: SIEMENS Sinumerik 840D sl;
Display: 19” DMG MORI SLIMline multi-touch control panel;
Machine Dimensions (LxWxH): 3700x1900x1900mm;
Weight: 4500kg;
Equipped with: part catcher, marposs tool pre setter, chip conveyor, LTA oil mist separator,
Combinatie
Dit kavel is onderdeel van een combinatie: Combination 3,39-44
Aanvullende informatie
Pickup in October and by appointment only. After the auction a detailed pickup schedule with dates and more information will be shared with all buyers. Due to complex logistics on site a professional service partner has been selected. The Swiss company Bollhalder Industrielogistik AG will be responsible for the proper dismantling and loading of lots onto the transport of the buyer. The costs for this mandatory service are shown per lot as 'Additional costs' and will be added to your bid. Extra services e.g. full service transport to destination can be requested after the auction. Lot numbers above 200 are already properly dismantled by and stored at the company Bollhalder (at which viewing and pickup is only by appointment).
Operating hours: 6355
Maximum turning Diameter: 320 mm;
Maximum turning Length: 440 mm;
X-Axis Travel: 185 mm;
Y-Axis Travel: +/- 40 mm;
Z1/Z3-Axis Travel: 465/550mm;
Number of sindels: 2;
Main Spindle type A2-6;
Sub spindle type A2-5;
Spindle Speed Range: Up to 5.000 rpm;
Spindle Power: 16.5 kW;
Main Spindle bore: 73mm;
Sub spindle bore: 45mm;
Number of Tool Stations: 12;
Tool shaft: VDI 30;
Driven tools: yes till 5.000 rpm;
Controle system: SIEMENS Sinumerik 840D sl;
Display: 19” DMG MORI SLIMline multi-touch control panel;
Machine Dimensions (LxWxH): 3700x1900x1900mm;
Weight: 4500kg;
Equipped with: part catcher, marposs tool pre setter, chip conveyor, LTA oil mist separator,
