9 - Hitatchi Seiki VS40 CNC milling machine
Norsborg | Schweden
Combination 9, 96, 225 | Metallbearbeitung - Dreh-, Fräsmaschinen
25.000,00 SEK
16 - 2003 Deckel Maho DMU 80T CNC machining center
Rümlang | CH
Startgebot
Aktuelles Gebot
Gesamtgebote
22.500,00 €
0
Bieten
Gebote
Höchstes Gebot
Überboten
Mein letztes Gebot: 0,00 € (Auto Gebot)
Aktie
Produktinformationen
| Marke | Deckel Maho |
| Anzahl | 1 |
| Jahr | 2003 |
| Seriennummer | 11130004663 |
| Typ | DMU 80T |
Power on hours: 5433
X-Axis Travel: 880 mm
Y-Axis Travel: 630 mm
Z-Axis Travel: 630 mm
Table Dimensions: 1250 mm x 700 mm
Spindle Speed Range: Up to 10,000 rpm
Spindle Motor Power: 25 kW
Tool Taper: SK40 Big plus
Tool Magazine: 1
Number of Tool Positions: 16
Maximum Tool Diameter: 130mm
Maximum Tool Length: 315 mm
Maximum Tool Weight: 8 kg
Tool Magazine: 2
Number of tool positions: 16
Maximum tool diameter: 80mm
Maximum tool length: 315 mm
Maximum tool weight: 8kg
Control System: Heidenhain TNC 530i
Approximate Dimensions (L x W x H): 3950 mm x 2900 mm x 2500 mm
Weight: Approximately 8800 kg
Equipped with: Hofmann RW/NC-220 SK50 4e axis, , Interlit paper filter, Elreha cooler, Martin Wetter oil mist separator, 2x Rotoclear clear glass, documentation
Kombination
Dieses Los ist Teil einer Kombination: Combination 16,123-128
Zusätzliche Informationen
Pickup within October and by appointment only. After the auction a detailed pickup schedule with dates and more information will be shared with all buyers. Selected service partner is Bollhalder Industrielogistik AG who is responsible for the proper dismantling and loading of lots onto the transport of the buyer. The costs for this mandatory service are shown per lot as 'Additional costs' and will be added to your bid. Lot numbers above 200 are already properly dismantled by and stored at the company Bollhalder (viewing and pickup by appointment only).
Power on hours: 5433
X-Axis Travel: 880 mm
Y-Axis Travel: 630 mm
Z-Axis Travel: 630 mm
Table Dimensions: 1250 mm x 700 mm
Spindle Speed Range: Up to 10,000 rpm
Spindle Motor Power: 25 kW
Tool Taper: SK40 Big plus
Tool Magazine: 1
Number of Tool Positions: 16
Maximum Tool Diameter: 130mm
Maximum Tool Length: 315 mm
Maximum Tool Weight: 8 kg
Tool Magazine: 2
Number of tool positions: 16
Maximum tool diameter: 80mm
Maximum tool length: 315 mm
Maximum tool weight: 8kg
Control System: Heidenhain TNC 530i
Approximate Dimensions (L x W x H): 3950 mm x 2900 mm x 2500 mm
Weight: Approximately 8800 kg
Equipped with: Hofmann RW/NC-220 SK50 4e axis, , Interlit paper filter, Elreha cooler, Martin Wetter oil mist separator, 2x Rotoclear clear glass, documentation
