36
Gebot
Gebote
Höchster Bieter
Überboten
4 - 2022 ANRITSU T105 300 SSV Series Checkweigher
Villebon-sur-Yvette | Frankreich
Wägekontrollen
Öffnet
Überprüfung
Jetzt schließen!
Geschlossen
123 - BIZERBA CWE Checkweigher
Kingersheim | FR
31
Gebot
Gebote
Höchster Bieter
Überboten
Mein letztes Gebot: 0,00 € (Auto Gebot)
Aktie
Produktinformationen
| Marke | BIZERBA |
| Anzahl | 1 |
| Typ | CWE |
Sold with conveyor
Operating hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight control
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Model number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating process:
* 1 – Product feed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specification, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
Kombination
Dieses Los ist Teil einer Kombination: G - Kombination | Combination | GUELT Packaging and End-of-Line System | 98 - 120 - 121 - 123 - 124 - 125 - 126
Wichtige Informationen
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Sold with conveyor
Operating hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight control
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Model number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating process:
* 1 – Product feed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specification, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
