36
Oferta
Oferty
Najwyższy oferent
Oferta przebita
4 - 2022 ANRITSU T105 300 SSV Series Checkweigher
Villebon-sur-Yvette | Francja
Wagi kontrolne
Otwarcie za
Weryfikowanie
Zamyka się teraz!
Zamknięta
123 - BIZERBA CWE Checkweigher
Kingersheim | FR
31
Oferta
Oferty
Najwyższy oferent
Oferta przebita
Moja ostatnia oferta: 0,00 € (oferta automatyczna)
Udostępnij:
Informacje o produkcie
| Marka | BIZERBA |
| Ilość | 1 |
| Typ | CWE |
Sold with conveyor
Operating hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight control
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Model number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating process:
* 1 – Product feed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specification, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
Zestaw
Ta pozycja jest częścią zestawu: G - Zestaw | Combination | GUELT Packaging and End-of-Line System | 98 - 120 - 121 - 123 - 124 - 125 - 126
Ważne informacje
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Sold with conveyor
Operating hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight control
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Model number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating process:
* 1 – Product feed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specification, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
