36
Bud
Bud
Högsta budgivare
Överbjuden
4 - 2022 ANRITSU T105 300 SSV Series Checkweigher
Villebon-sur-Yvette | Frankrike
Vågkontroller
Öppnar
Verifierar
Stänger nu!
Stängd
123 - BIZERBA CWE Checkweigher
Kingersheim | FR
31
Bud
Bud
Högsta budgivare
Överbjuden
Mitt senaste bud: 0,00 € (Autobud)
Dela:
Produktinformation
| Märke | BIZERBA |
| Type | CWE |
| Amount | 1 |
Sold with conveyor
Operating hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight control
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Model number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating process:
* 1 – Product feed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specification, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
Kombination
Detta objekt är en del av en kombination: G - Kombination | Combination | GUELT Packaging and End-of-Line System | 98 - 120 - 121 - 123 - 124 - 125 - 126
Wichtige Informationen
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Sold with conveyor
Operating hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight control
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Model number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating process:
* 1 – Product feed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specification, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
