4 - 2022 ANRITSU T105 300 SSV Series Checkweigher
Villebon-sur-Yvette | Frankreich
Wägekontrollen
1.550,00 €
Aktie
Produktinformationen
| Marke | BIZERBA |
| Anzahl | 1 |
| Typ | CWE |
Sold with conveyor
Operating Hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight checking
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance limits
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Part number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating Process:
* 1 – Product Infeed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specifications, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
Description generated using AI
Wichtige Informationen
A single dismantling contractor appointed by the seller will be mandatory for all buyers. Dismantling, lift-out and loading will therefore be coordinated centrally to ensure safe and efficient removal and delivery of the equipment.
Sold with conveyor
Operating Hours
* Displayed counter: 967 days and 23 hours 15 minutes
* For automatic in-line product weight checking
* Range: 1,500 / 3,000 g
* Minimum load: 50 g
* Configured belt speed: max. 60 m/min
* Color touchscreen
* Transport and weighing conveyors
* Rejection system for products outside tolerance limits
* Stainless steel construction
* Power supply: 220–240 V / 50 Hz / 3.0 A
* Compressed air: 6 bar
* Operating temperature: 0 to +40 °C
* Hour meter: approx. 23,231 hours
* Serial number: 11194974
* Part number: BU48
Dimensions: approx. 1,200 × 800 × 1,600 mm (L × W × H) without conveyor
Operating Process:
* 1 – Product Infeed: Packaged products arrive from the production line conveyor.
* 2 – Spacing/Transfer: The infeed conveyor positions and transfers the products individually to the weighing zone.
* 3 – Dynamic Weighing: Each product passes over the Bizerba weighing conveyor without stopping the line.
* 4 – Weight check: The measured weight is automatically compared to the nominal value and the tolerances programmed into the PLC.
* 5 – Classification: The system determines whether the product is within specifications, underweight, or overweight.
* 6 – Ejection of non-compliant products: Depending on the line configuration, products outside the tolerance range are automatically diverted or rejected.
* 7 – Compliant product: Accepted products continue along the exit conveyor to the next stage of production or packaging.
* 8 – Recording: The control screen allows you to track production quantities and weight statistics.
Description generated using AI
Besichtigung nach Vereinbarung am : -
12 Rue de l'Industrie
68260 Kingersheim (Frankreich)
Besichtigung nach Vereinbarung am : -
12 Rue de l'Industrie
68260 Kingersheim (Frankreich)
