8 - 2015 MAN Roland B700_B1 _510 Model R710 3B P 5/5 10-color offset sheet press
Brugge | Bélgica
Industria gráfica - Colour Offset Presses
400.000,00 €
Abre
Verificando
¡Ahora cerrando!
Cerrado
1004 - 2003 Mori Seiki Hitec CH250 Multi operation lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
1
Pujar
Pujas
Mayor postor
Superado
Mi última puja: 0,00 SEK (Puja automática)
Compartir
Información del producto
| Marca | Mori seiki hitec |
| Type | CH250 |
| Year | 2001 |
| Serial number | CH250CCD0009 |
| Amount | 1 |
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 67 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 40 tools (2 × 20)
Tool Holder Type: KV4540
Control System: Fanuc series 18i
Equipped with: Absolent ab oil mist filter, enomoto chip conveyor, coolant filter, documentation
X-axis Travel: 600 mm
Z-axis Travel: 1,000 mm
Y-axis Travel: ±75 mm
B-axis travel: 858 mm
C1/C2-axis: 0.001° increments
X/Z-axis: 30 m/min
Y-axis: 15 m/min
Machine Weight: 8000 kg
Dimensions LxWxH: 3300x1930x2290mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 4, 254-261.
Información adicional
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 67 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 40 tools (2 × 20)
Tool Holder Type: KV4540
Control System: Fanuc series 18i
Equipped with: Absolent ab oil mist filter, enomoto chip conveyor, coolant filter, documentation
X-axis Travel: 600 mm
Z-axis Travel: 1,000 mm
Y-axis Travel: ±75 mm
B-axis travel: 858 mm
C1/C2-axis: 0.001° increments
X/Z-axis: 30 m/min
Y-axis: 15 m/min
Machine Weight: 8000 kg
Dimensions LxWxH: 3300x1930x2290mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 4, 254-261.
Recogida según el horario - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Recogida según el horario - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Recogida según el horario - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Lotes relevantes
-
-
1 - 2023 MAN Roland B700_B1 _530 Model R700 3B PLV 5/5 Evolution Elite 10-color offset sheetfed press
Brugge | Bélgica
Industria gráfica - Colour Offset Presses
100.000,00 €
Venta mediante licitación
-
11 - 2008 Muller Martini Primera A110 - 1555.0403 Saddle stitching line
Brugge | Bélgica
Industria gráfica - Book Binding & Finishing Systems
19.500,00 €