1 - 2014 Trumpf TruLaser 5030 (L56) 5kW fiber laser cutting machine
Bubikon | Zwitserland
combination1+2 | Metaalbewerking - Laser snijmachines
CHF 5.000,00
Opent
Verifiëren
Sluit nu!
Gesloten
1001 - 2007 Mori Seiki NT3200 CNC lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
0
Bod
Biedingen
Hoogste bod
Overboden
Mijn laatste bod: SEK 0,00 (Automatisch bod)
Delen
Productinformatie
| Merk | Mori seiki |
| Jaar | 2007 |
| Serienummer | NT320GA0030 |
| Type | NT 3200 DCG |
Run time: 7976H
Maximum turning diameter (milling head): 600mm
Maximum turning diameter (turret): 210mm
Maximum turning length: 1045mm
Spindel bore: 67mm
Number of tool spaces: 40
Spindel: Kitagawa SS1666
Spindel speed: 5000 RPM
Control system: Fanuc Series 31i
Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation
Milling head
Maximum speed: 12000 RPM
Tool shaft size: C5
X-axis travel: 685mm
Y-axis travel: ±125mm
Z-axis travel: 1075mm
B-axis travel: ±120°
X/Z-axis rapid traverse: 50 m/min
Y-axis rapid traverse: 30 m/min
Turret
Number of tool places: 12
Driven tool speed: 6000 RPM
X-axis travel: 130mm
Z-axis travel: 970mm
X/Z-axis rapid traverse: 30 m/min
Machine dimensions LxWxH: 5200x3100x3000mm
Own weight: 14400 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 1, 108-111, 240, 462.
Aanvullende informatie
Afhaaldagen zijn gepland op 30 september en 1, 2 en 3 oktober van 09:00 tot 16:00 uur. Kopers worden binnen 48 uur na sluiting van de verkoop gecontacteerd en worden aangewezen op 1 van deze dagen (kopers worden verspreid over 4 dagen via een schema voor veiligheid ter plaatse en crowd control). De contactgegevens van een geprefereerde en professionele internationale servicepartner (voor ophaalbijstand, demontage en/of volledig verzorgd partijtransport) zullen onmiddellijk na de verkoop met alle kopers worden gedeeld. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Run time: 7976H
Maximum turning diameter (milling head): 600mm
Maximum turning diameter (turret): 210mm
Maximum turning length: 1045mm
Spindel bore: 67mm
Number of tool spaces: 40
Spindel: Kitagawa SS1666
Spindel speed: 5000 RPM
Control system: Fanuc Series 31i
Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation
Milling head
Maximum speed: 12000 RPM
Tool shaft size: C5
X-axis travel: 685mm
Y-axis travel: ±125mm
Z-axis travel: 1075mm
B-axis travel: ±120°
X/Z-axis rapid traverse: 50 m/min
Y-axis rapid traverse: 30 m/min
Turret
Number of tool places: 12
Driven tool speed: 6000 RPM
X-axis travel: 130mm
Z-axis travel: 970mm
X/Z-axis rapid traverse: 30 m/min
Machine dimensions LxWxH: 5200x3100x3000mm
Own weight: 14400 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 1, 108-111, 240, 462.
Relevante kavels
-
-
3 - 2009 Trumpf TruLaser Cell 7040 (L13) bed/tube laser cutting machine
Bubikon | Zwitserland
combination 3+98 | Metaalbewerking - Laser snijmachines
CHF 5.000,00
-
/13-02.jpg)
13 - 1997 Tetra Pak TBA/21-1000 S aseptic filling machine
Luleå | Zweden
C - Combination Line 3 (nr. 13-16) | Zuivelverwerking - Vulmachinen
€ 45.000,00