8 - 2007 Tetra Pak TBA 19 / TBA 250 base Aseptic Filling machine
Luleå | Svezia
Lavorazione dei latticini - Nastri trasportatori
Aperto
Verifica
Ora chiudiamo!
Chiuso
1001 - 2007 Mori Seiki NT3200 CNC lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
0
Offri
Offerte
Maggior offerente
Superato
La mia ultima offerta: 0,00 SEK (Offerta automatica)
Condividere
Informazioni sul prodotto
| Marchio | Mori seiki |
| Type | NT 3200 DCG |
| Year | 2007 |
| Serial number | NT320GA0030 |
Run time: 7976H
Maximum turning diameter (milling head): 600mm
Maximum turning diameter (turret): 210mm
Maximum turning length: 1045mm
Spindel bore: 67mm
Number of tool spaces: 40
Spindel: Kitagawa SS1666
Spindel speed: 5000 RPM
Control system: Fanuc Series 31i
Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation
Milling head
Maximum speed: 12000 RPM
Tool shaft size: C5
X-axis travel: 685mm
Y-axis travel: ±125mm
Z-axis travel: 1075mm
B-axis travel: ±120°
X/Z-axis rapid traverse: 50 m/min
Y-axis rapid traverse: 30 m/min
Turret
Number of tool places: 12
Driven tool speed: 6000 RPM
X-axis travel: 130mm
Z-axis travel: 970mm
X/Z-axis rapid traverse: 30 m/min
Machine dimensions LxWxH: 5200x3100x3000mm
Own weight: 14400 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 1, 108-111, 240, 462.
Informazioni aggiuntive
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Run time: 7976H
Maximum turning diameter (milling head): 600mm
Maximum turning diameter (turret): 210mm
Maximum turning length: 1045mm
Spindel bore: 67mm
Number of tool spaces: 40
Spindel: Kitagawa SS1666
Spindel speed: 5000 RPM
Control system: Fanuc Series 31i
Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation
Milling head
Maximum speed: 12000 RPM
Tool shaft size: C5
X-axis travel: 685mm
Y-axis travel: ±125mm
Z-axis travel: 1075mm
B-axis travel: ±120°
X/Z-axis rapid traverse: 50 m/min
Y-axis rapid traverse: 30 m/min
Turret
Number of tool places: 12
Driven tool speed: 6000 RPM
X-axis travel: 130mm
Z-axis travel: 970mm
X/Z-axis rapid traverse: 30 m/min
Machine dimensions LxWxH: 5200x3100x3000mm
Own weight: 14400 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 1, 108-111, 240, 462.
Ritiro secondo il programma - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Ritiro secondo il programma - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Ritiro secondo il programma - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
