1 - 2012 STAMA MC 726 2012 CNC machining center
Weinfelden | Suisse
usinage CNC
20 000,00 CHF
4 - 2005 Mazak Integrex 300-III CNC mill-turn center
Weinfelden | CH
Offre de départ
Offre actuelle
Total des enchères
35 000,00 CHF
0
Enchère
Enchères
Enchérisseur le plus élevé
Surenchéri
Ma dernière enchère: 0,00 CHF (Enchère automatique)
Partager
Informations sur le produit
| Marque | Mazak |
| Année | 2005 |
| Quantité | 1 |
| Type | Integrex 300-III |
X1/X2-axis travel: 630/230mm
Y-axis travel: 230mm
Z1/Z2-axis travel: 1585/1530mm
W-axis travel: 1530mm
X1/X2/Y/Z1/Z2/W-axis rapid traverse: 38/38/26/38/38/30 m/min
Maximum working length: 1524mm
Maximum working diameter: 760mm
Main spindle speed: 35-4.000 rpm
Sub spindle speed: 35-4.000 rpm
Main/sub spindle bore: 88mm
Main/sub spindle power: 26 kW
Milling spindle speed: 15-12.000 rpm
Milling spindle power: 18,5 kW
Toolholder type: C6
Positions in the toolmagazine: 80
Positions on turret: 9
Control system: Mazatrol 640MT Pro
Equipped with: un-loading magazine, tool pre setter, Mayfran chip conveyor, paper filter, wetter oil mist separator, probe
Informations importantes
All lots have been professionally dismantled and are relocated by and at Bollhalder in Weinfelden (https://industrielogistik.ch/). A mandatory cost per lot is therefore applicable and visibly added during bidding.
X1/X2-axis travel: 630/230mm
Y-axis travel: 230mm
Z1/Z2-axis travel: 1585/1530mm
W-axis travel: 1530mm
X1/X2/Y/Z1/Z2/W-axis rapid traverse: 38/38/26/38/38/30 m/min
Maximum working length: 1524mm
Maximum working diameter: 760mm
Main spindle speed: 35-4.000 rpm
Sub spindle speed: 35-4.000 rpm
Main/sub spindle bore: 88mm
Main/sub spindle power: 26 kW
Milling spindle speed: 15-12.000 rpm
Milling spindle power: 18,5 kW
Toolholder type: C6
Positions in the toolmagazine: 80
Positions on turret: 9
Control system: Mazatrol 640MT Pro
Equipped with: un-loading magazine, tool pre setter, Mayfran chip conveyor, paper filter, wetter oil mist separator, probe
