53 - Chariot élévateur tout-terrain à quatre roues motrices Mast Explorer 15
Lo-Reninge | Belgique
Chariots élévateurs
2 300,00 €
2 - 2017 Tsugami B0206E-III CNC Swiss-type automatic lathe
Mill | NL
Offre de départ
Offre actuelle
Total des enchères
10 000,00 €
0
Enchère
Enchères
Enchérisseur le plus élevé
Surenchéri
Ma dernière enchère: 0,00 € (Enchère automatique)
Partager
Informations sur le produit
| Marque | Tsugami |
| Année | 2017 |
| Numéro de série | 21046A |
| Quantité | 1 |
| Type | B0206E-III |
Machine Capacity;
Max. workpiece length: 210 mm (with guide bushing) / 80 mm (without guide bushing)
Max. drilling capacity: M10 × 1.5
Max. tapping capacity: M10 × 1.5
Max. bar diameter: Ø20 mm
Max. drill chuck diameter: Ø8 mm
Max. milling diameter: M8 × 1.25
Max. threading capacity: M5 × 0.8
Hour meter reading: 23,338
Secondary spindle;
Max. drilling capacity: M6
Max. tapping capacity: M6
Main spindle;
Max. spindle speed: 200–12,000 r/min
Guide bush: Guide bush with oil supply (pull-type)
Nominal oil flow: 6,000 ml/min
Machine;
Tool holders (max.): 25 positions
Feed/stroke;
Rapid traverse: 32 m/min
X1-axis travel: 42 mm
Y1-axis travel: 72.5 mm
Z1-axis travel: 65 mm
Motors;
Main spindle motor: 2.2 / 3.7 kW
Sub-spindle motor: 1.5 / 2.2 kW
X1/X2 axis: 0.5 kW
Y1/Y2 axis: 0.5 kW
Z1/Z2 axis: 0.5 kW
Coolant pump: 0.75 kW
Lubricating oil pump: 0.3 kW
Control system: Fanuc Series 32i-MODEL B
Connected load: 12 kVA
Compressed air connection: 0.4 MPa
Machine dimensions: 1,635 × 1,635 × 1,700 mm
Equipped with: Chip conveyor, Mitec OMK PF 11 TF0M filter.
Réunion de lots
Ce lot fait partie d'une réunion de lots: Combination B | CNC Swiss-type automatic lathe with automatic bar feeder (lots 2 & 9)
Machine Capacity;
Max. workpiece length: 210 mm (with guide bushing) / 80 mm (without guide bushing)
Max. drilling capacity: M10 × 1.5
Max. tapping capacity: M10 × 1.5
Max. bar diameter: Ø20 mm
Max. drill chuck diameter: Ø8 mm
Max. milling diameter: M8 × 1.25
Max. threading capacity: M5 × 0.8
Hour meter reading: 23,338
Secondary spindle;
Max. drilling capacity: M6
Max. tapping capacity: M6
Main spindle;
Max. spindle speed: 200–12,000 r/min
Guide bush: Guide bush with oil supply (pull-type)
Nominal oil flow: 6,000 ml/min
Machine;
Tool holders (max.): 25 positions
Feed/stroke;
Rapid traverse: 32 m/min
X1-axis travel: 42 mm
Y1-axis travel: 72.5 mm
Z1-axis travel: 65 mm
Motors;
Main spindle motor: 2.2 / 3.7 kW
Sub-spindle motor: 1.5 / 2.2 kW
X1/X2 axis: 0.5 kW
Y1/Y2 axis: 0.5 kW
Z1/Z2 axis: 0.5 kW
Coolant pump: 0.75 kW
Lubricating oil pump: 0.3 kW
Control system: Fanuc Series 32i-MODEL B
Connected load: 12 kVA
Compressed air connection: 0.4 MPa
Machine dimensions: 1,635 × 1,635 × 1,700 mm
Equipped with: Chip conveyor, Mitec OMK PF 11 TF0M filter.
