3 - 2009 Trumpf TruLaser Cell 7040 (L13) bed/tube laser cutting machine
Bubikon | Suisse
combination 3+98 | Métallurgie - Machines de découpe laser
5 000,00 CHF
Ouvre
Vérification
Fermeture en cours !
Fermé
1005 - Hitachi Seiki CH250 Multi operation lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
0
Enchérir
Offres
Enchérisseur le plus offrant
Surenchéri
Ma dernière enchère: 0,00 SEK (Enchère automatique)
Partager
Informations sur le produit
| Marque | Hitachi seiki |
| Année | 1999 |
| Type | CH250 |
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 65 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 20
Tool Holder Type: KV4540
Control System: Seicos 16T (Fanuc 16iT)
X-Axis Travel: 600 mm
Z-Axis Travel: 1,000 mm
Y-Axis Travel: ±75 mm
B-Axis Travel: 858 mm
C-Axis indexation: 0.001°
X/Z-Axis Rapid Traverse: 30 m/min
Y-Axis Rapid Traverse: 15 m/min
Machine Weight: 8,000 kg
Dimensions (LxWxH): 3,300x1,930x2,290 mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 5, 101-102, 107, 268.
Informations supplémentaires
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 65 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 20
Tool Holder Type: KV4540
Control System: Seicos 16T (Fanuc 16iT)
X-Axis Travel: 600 mm
Z-Axis Travel: 1,000 mm
Y-Axis Travel: ±75 mm
B-Axis Travel: 858 mm
C-Axis indexation: 0.001°
X/Z-Axis Rapid Traverse: 30 m/min
Y-Axis Rapid Traverse: 15 m/min
Machine Weight: 8,000 kg
Dimensions (LxWxH): 3,300x1,930x2,290 mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 5, 101-102, 107, 268.
Ramassage selon le calendrier - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Ramassage selon le calendrier - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
Ramassage selon le calendrier - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (SE)
