/302-01.jpg)
302 - Volvo L50C wheel loader
Luleå | Suède
P - Combination Volvo Wheel Loader and Accessories (Nr. 302, 819, 824-826) | machines de transformation des aliments - Divers équipements de transformation alimentaire
12 250,00 €
Ouvre
Vérification
Fermeture en cours !
Fermé
15 - Colchester Master 2500 Lathe
Norsborg | SE
38
Enchérir
Offres
Enchérisseur le plus offrant
Surenchéri
Ma dernière enchère: 0,00 SEK (Enchère automatique)
Partager
Informations sur le produit
| Marque | Colchester |
| Quantité | 1 |
| Type | Master 2500 |
Center height: 165 mm
Center width: 635 mm
Swing over bed: 335 mm
Swing over cross slide: 210 mm
Swing in gap: 480 mm
Distance in front of faceplate: 115 mm
Spindle bore (max. bar size): 40 mm
Spindle nose: 4 in. D1 Camlock
Spindle taper: MK 3
Tailstock taper: MK 3
Bed width: 230 mm
Cross slide travel: 210 mm
Top slide travel: 72 mm
Tailstock sleeve travel: 145 mm
Number of spindle speeds: 16
Speed range: 30–2500 rpm
Machine total width: 890 mm
Machine total length: 1195 mm
Drive: 2-step belt
Motor: 5 hp
Combinaison
Ce lot fait partie d'une combinaison: Combination Lot 15, 216
Informations supplémentaires
Indicational exchange rate for SEK 10.000 is EUR 900. Pickup days for small, easy pickup lots, tools, workshop etc. are scheduled and without appointment for September 8, 9 and 10 from 09:00 to 16:00. Buyers of large machines, specific lots and installations will be contacted within 48 hours after the sale closure to schedule the pickup of those lots by appointment (mandatory late week 37 and/or during week 38 latest). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with the buyers right after the sale.
Center height: 165 mm
Center width: 635 mm
Swing over bed: 335 mm
Swing over cross slide: 210 mm
Swing in gap: 480 mm
Distance in front of faceplate: 115 mm
Spindle bore (max. bar size): 40 mm
Spindle nose: 4 in. D1 Camlock
Spindle taper: MK 3
Tailstock taper: MK 3
Bed width: 230 mm
Cross slide travel: 210 mm
Top slide travel: 72 mm
Tailstock sleeve travel: 145 mm
Number of spindle speeds: 16
Speed range: 30–2500 rpm
Machine total width: 890 mm
Machine total length: 1195 mm
Drive: 2-step belt
Motor: 5 hp
Lots concernés
-
-
/64-01.jpg)
64 - 2007 Scanima Mixer STM-10000 s/s vertical mixing tank 10.500L
Luleå | Suède
G - Combination Mixing Station 2 (nr. 61-66) | machines de transformation des aliments - Divers équipements de transformation alimentaire
5 600,00 €
-
/77-01.jpg)
77 - 2007 Inter system ImPluz 50 Clk Pallet stacker
Luleå | Suède
machines de transformation des aliments - Divers équipements de transformation alimentaire
1 000,00 €