10 - 1991 Multivac R5200 Thermoforming packaging machine
Hultsfred | Zweden
Thermoformers
€ 110,00
127 - REPACK RE25 Thermoforming Machine
Kingersheim | FR
Startbod
Huidig bod
Totaal aantal biedingen
€ 2.500,00
0
Bod
Biedingen
Hoogste bieder
Overboden
Mijn laatste bod: € 0,00 (Automatisch bod)
Delen
Productinformatie
| Merk | REPACK |
| Aantal | 1 |
| Jaar | 2007 |
| Type | RE25 |
Technical Specifications:
* Constructed primarily of stainless steel.
* Dimensions: approximately 4,000 to 12,000 x 1,030 / 1,220 x 1,950 mm, depending on configuration.
* Weight: approximately 2,200 to 3,500 kg, including the vacuum pump.
* Working height: approximately 950 to 1,040 mm.
* Compatible film width: 300 to 650 mm.
* Maximum feed stroke length: 600 mm.
* Maximum package height: 160 mm.
* Clear loading area: approximately 800 to 3,000 mm, depending on configuration.
* Motorized drum-type output conveyor.
* Output conveyor speed: up to approximately 1.2 m/s.
* Film unwinding via single-sided suspension with passive braking.
Power Supply and Utilities
* Power supply indicated on nameplate: 400 V.
* Three-phase power supply + ground.
* Frequency: 50 Hz.
* Power rating indicated on machine nameplate: 12 kW.
* Rated current indicated on nameplate: 80 A.
* Compressed air required: approximately 6 to 7 bar.
* Gas: approximately 4 to 6 bar.
* Water supply: approximately 0.5 to 3 bar.
* Specified water consumption: approximately 60 liters/hour.
* Maximum relative humidity: 70%.
* Specified noise level: approximately 70 dB.
Films and packaging:
* Compatible film width: 300 to 650 mm.
* Bottom film used for thermoforming trays.
* Top film used for sealing packages.
* Maximum feed pitch: 600 mm.
* Maximum package height: 160 mm.
* Capable of producing multiple molds/trays per cycle depending on the tooling installed.
* Format configuration depends on the tooling mounted on the machine.
with integrated CONSOL output conveyor
dimensions: Length 129 cm x Width: 90 cm x Height: 123 cm
Belangrijke informatie
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Technical Specifications:
* Constructed primarily of stainless steel.
* Dimensions: approximately 4,000 to 12,000 x 1,030 / 1,220 x 1,950 mm, depending on configuration.
* Weight: approximately 2,200 to 3,500 kg, including the vacuum pump.
* Working height: approximately 950 to 1,040 mm.
* Compatible film width: 300 to 650 mm.
* Maximum feed stroke length: 600 mm.
* Maximum package height: 160 mm.
* Clear loading area: approximately 800 to 3,000 mm, depending on configuration.
* Motorized drum-type output conveyor.
* Output conveyor speed: up to approximately 1.2 m/s.
* Film unwinding via single-sided suspension with passive braking.
Power Supply and Utilities
* Power supply indicated on nameplate: 400 V.
* Three-phase power supply + ground.
* Frequency: 50 Hz.
* Power rating indicated on machine nameplate: 12 kW.
* Rated current indicated on nameplate: 80 A.
* Compressed air required: approximately 6 to 7 bar.
* Gas: approximately 4 to 6 bar.
* Water supply: approximately 0.5 to 3 bar.
* Specified water consumption: approximately 60 liters/hour.
* Maximum relative humidity: 70%.
* Specified noise level: approximately 70 dB.
Films and packaging:
* Compatible film width: 300 to 650 mm.
* Bottom film used for thermoforming trays.
* Top film used for sealing packages.
* Maximum feed pitch: 600 mm.
* Maximum package height: 160 mm.
* Capable of producing multiple molds/trays per cycle depending on the tooling installed.
* Format configuration depends on the tooling mounted on the machine.
with integrated CONSOL output conveyor
dimensions: Length 129 cm x Width: 90 cm x Height: 123 cm
