4 - 2003 Mori Seiki Hitec CH250 Multi operation lathe
Norsborg | Zweden
Combination 4, 254 – 261 | Metaalbewerking - CNC lathes
SEK 25.000,00
1 - 2007 Mori Seiki NT3200 CNC lathe
Norsborg | SE
Startbod
Huidig bod
Totaal aantal biedingen
SEK 50.000,00
0
Bod
Biedingen
Hoogste bod
Overboden
Mijn laatste bod: SEK 0,00 (Automatisch bod)
Delen
Productinformatie
| Merk | Mori seiki |
| Aantal | 1 |
| Jaar | 2007 |
| Serienummer | NT320GA0030 |
| Type | NT 3200 DCG |
Run time: 7976H
Maximum turning diameter (milling head): 600mm
Maximum turning diameter (turret): 210mm
Maximum turning length: 1045mm
Spindel bore: 67mm
Number of tool spaces: 40
Spindel: Kitagawa SS1666
Spindel speed: 5000 RPM
Control system: Fanuc Series 31i
Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation
Milling head
Maximum speed: 12000 RPM
Tool shaft size: C5
X-axis travel: 685mm
Y-axis travel: ±125mm
Z-axis travel: 1075mm
B-axis travel: ±120°
X/Z-axis rapid traverse: 50 m/min
Y-axis rapid traverse: 30 m/min
Turret
Number of tool places: 12
Driven tool speed: 6000 RPM
X-axis travel: 130mm
Z-axis travel: 970mm
X/Z-axis rapid traverse: 30 m/min
Machine dimensions LxWxH: 5200x3100x3000mm
Own weight: 14400 kg
Combinatie
Dit kavel is onderdeel van een combinatie: Combination 1, 108-111, 240, 462
Aanvullende informatie
Indicational exchange rate for SEK 10.000 is EUR 900. Pickup days for small, easy pickup lots, tools, workshop etc. are scheduled and without appointment for September 8, 9 and 10 from 09:00 to 16:00. Buyers of large machines, specific lots and installations will be contacted within 48 hours after the sale closure to schedule the pickup of those lots by appointment (mandatory late week 37 and/or during week 38 latest). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with the buyers right after the sale.
Run time: 7976H
Maximum turning diameter (milling head): 600mm
Maximum turning diameter (turret): 210mm
Maximum turning length: 1045mm
Spindel bore: 67mm
Number of tool spaces: 40
Spindel: Kitagawa SS1666
Spindel speed: 5000 RPM
Control system: Fanuc Series 31i
Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation
Milling head
Maximum speed: 12000 RPM
Tool shaft size: C5
X-axis travel: 685mm
Y-axis travel: ±125mm
Z-axis travel: 1075mm
B-axis travel: ±120°
X/Z-axis rapid traverse: 50 m/min
Y-axis rapid traverse: 30 m/min
Turret
Number of tool places: 12
Driven tool speed: 6000 RPM
X-axis travel: 130mm
Z-axis travel: 970mm
X/Z-axis rapid traverse: 30 m/min
Machine dimensions LxWxH: 5200x3100x3000mm
Own weight: 14400 kg
