25 - ZM Flerstegs rörslip- och polermaskin
Depot Deinze | Belgien
Polermaskiner
500,00 €
Öppnar
Verifierar
Stänger nu!
Stängd
15 - 2010 TIPPER TIE ALPINA Swipper 15/12 Automatic Clipping Machine
Kingersheim | FR
43
Bud
Bud
Högsta budgivare
Överbjuden
Mitt senaste bud: 0,00 € (Autobud)
Dela:
Produktinformation
| Märke | TIPPER TIE ALPINA |
| Amount | 1 |
| Type | Swipper 15/12 |
| Year | 2010 |
| Serial number | 854.190 |
Size range: 20–80 mm depending on the tube material (as specified in the manual)
Maximum cycle rate: up to 200 cycles/min (as specified in the manual)
Power supply: 3 x 400 V AC, 50/60 Hz
Compressed air required: 6–7 bar
Air consumption: approx. 0.23 m³/min (as per manual)
Max. connected load: ~6.5 kW (as per technical manual)
Protection rating: IP65 (as per manual)
Estimated dimensions based on the sketch: approx. L 1550 x D 1080 x H 1800 mm
Estimated weight: approx. 450 kg
Stainless steel construction, suitable for food processing environments
Touchscreen control panel with emergency stop
Dual clip magazine with dispensers and side clipping head
Integrated input/output conveyor
Mounted on casters with stabilizing feet
Printed technical documentation included
Wichtige Informationen
All buyers must use a single dismantling contractor designated by the seller. Dismantling, removal, and loading will therefore be coordinated centrally to ensure the safe and efficient removal of the equipment.
Size range: 20–80 mm depending on the tube material (as specified in the manual)
Maximum cycle rate: up to 200 cycles/min (as specified in the manual)
Power supply: 3 x 400 V AC, 50/60 Hz
Compressed air required: 6–7 bar
Air consumption: approx. 0.23 m³/min (as per manual)
Max. connected load: ~6.5 kW (as per technical manual)
Protection rating: IP65 (as per manual)
Estimated dimensions based on the sketch: approx. L 1550 x D 1080 x H 1800 mm
Estimated weight: approx. 450 kg
Stainless steel construction, suitable for food processing environments
Touchscreen control panel with emergency stop
Dual clip magazine with dispensers and side clipping head
Integrated input/output conveyor
Mounted on casters with stabilizing feet
Printed technical documentation included
