• Slajd 1
  • Slajd 2
  • Slajd 3
  • Slajd 4
Otwarcie za
Weryfikowanie
Zamyka się teraz!
Zamknięta
()

16 - NAKAMURA TOME TM 20 II L 2-Axis CNC Lathe

Le Plessis-Pâté | FR
36 Oferta Oferty Najwyższy oferent Oferta przebita

Moja ostatnia oferta: 0,00 € (oferta automatyczna)

Udostępnij:

Informacje o produkcie

Marka NAKAMURA TOME
Ilość 1
Typ TM 20 II L

1995 NAKAMURA TOME TM 20II L CNC Lathe

Technical Specifications:

* Capacities and Working Envelope:
- Maximum diameter over bed: 400 mm
- Maximum diameter over the carriage: 280 mm
- Maximum turning diameter: 280 mm
- Maximum turning length (L version): 460 mm (compared to 300 mm on the standard version)
- Distance between centers: 460 mm

* Main Spindle:
- Spindle speed: 50 to 4,500 rpm (continuously variable)
- Spindle nose: A2-5 or A2-6 (depending on original chuck)
- Spindle bore: 62 mm
- Effective bar passage diameter: 51 mm
- Standard chuck size: 200 mm (3 hydraulic jaws)

* Turret and Tooling:
- Turret type: Automatic turret with rapid hydraulic indexing
- Number of positions: 10 stations (VDI-type tool holders or standard blocks)
- Turning tool cross-section: 25 mm × 25 mm square
- Max. boring bar diameter: 32 mm or 40 mm
- Indexing time: Less than 0.5 seconds from station to station

* Axes, Strokes, and Feed Rates:
- X-axis stroke: 162 mm
- Z-axis stroke (L Version): 460 mm (Extended turning)
- Rapid feed rates (X): 16 m/min (630 IPM)
- Rapid feed rates (Z): 24 m/min (945 IPM)

* Tailstock (Moving Headstock):
- Type: Manual positioning via linkage with the carriage (towable) with hydraulic quill extension
- Quill taper: CM-4 (MT4)
- Hydraulic sleeve stroke: 80 mm

* Weight and Dimensions:
- Net weight of the machine: 2,720 kg
- Overall length: 2,450 mm
- Overall width: 1,525 mm
- Overall height: 1,720 mm to 1,825 mm
- Required power supply: Three-phase 220 V/380 V – 50/60 Hz – Installed power of approximately 22 to 25 kVA.

Ważne informacje

A single dismantling contractor appointed by the seller will be mandatory for all buyers. Dismantling and loading will therefore be coordinated centrally to ensure safe and efficient removal of the equipment.

1995 NAKAMURA TOME TM 20II L CNC Lathe

Technical Specifications:

* Capacities and Working Envelope:
- Maximum diameter over bed: 400 mm
- Maximum diameter over the carriage: 280 mm
- Maximum turning diameter: 280 mm
- Maximum turning length (L version): 460 mm (compared to 300 mm on the standard version)
- Distance between centers: 460 mm

* Main Spindle:
- Spindle speed: 50 to 4,500 rpm (continuously variable)
- Spindle nose: A2-5 or A2-6 (depending on original chuck)
- Spindle bore: 62 mm
- Effective bar passage diameter: 51 mm
- Standard chuck size: 200 mm (3 hydraulic jaws)

* Turret and Tooling:
- Turret type: Automatic turret with rapid hydraulic indexing
- Number of positions: 10 stations (VDI-type tool holders or standard blocks)
- Turning tool cross-section: 25 mm × 25 mm square
- Max. boring bar diameter: 32 mm or 40 mm
- Indexing time: Less than 0.5 seconds from station to station

* Axes, Strokes, and Feed Rates:
- X-axis stroke: 162 mm
- Z-axis stroke (L Version): 460 mm (Extended turning)
- Rapid feed rates (X): 16 m/min (630 IPM)
- Rapid feed rates (Z): 24 m/min (945 IPM)

* Tailstock (Moving Headstock):
- Type: Manual positioning via linkage with the carriage (towable) with hydraulic quill extension
- Quill taper: CM-4 (MT4)
- Hydraulic sleeve stroke: 80 mm

* Weight and Dimensions:
- Net weight of the machine: 2,720 kg
- Overall length: 2,450 mm
- Overall width: 1,525 mm
- Overall height: 1,720 mm to 1,825 mm
- Required power supply: Three-phase 220 V/380 V – 50/60 Hz – Installed power of approximately 22 to 25 kVA.

Dni oględzin

: -

7 Rue du Bicentenaire de la Révolution
91220 Le Plessis-Pâté (Francja)

Dni odbioru

Odbiór zgodnie z harmonogramem (informacje zostaną przekazane po aukcji)

7 Rue du Bicentenaire de la Révolution
91220 Le Plessis-Pâté (Francja)

Powiązane pozycje

  • Zdjęcie poglądowe: MATSUURA RA-1 Vertical Machining Center
    2 Oferta Oferty Najwyższy oferent Oferta przebita

    17 - MATSUURA RA-1 Vertical Machining Center

    Le Plessis-Pâté | Francja

    Pionowe centra maszynowe CNC

  • Zdjęcie poglądowe: MATSUURA RA-2G 3-Axis Machining Center
    25 Oferta Oferty Najwyższy oferent Oferta przebita

    15 - MATSUURA RA-2G 3-Axis Machining Center

    Le Plessis-Pâté | Francja

    Uniwersalne centra maszynowe CNC

  • Zdjęcie poglądowe: TOPPER TMV 510T 3-Axis Machining Center
    25 Oferta Oferty Najwyższy oferent Oferta przebita

    8 - TOPPER TMV 510T 3-Axis Machining Center

    Le Plessis-Pâté | Francja

    Uniwersalne centra maszynowe CNC