84 - 2013 Volvo ECR 235 DL Crawler Excavator
Waregem | Belgia
Koparki Midi
36 000,00 €
Otwarcie za
Weryfikowanie
Zamyka się teraz!
Zamknięta
1004 - 2003 Mori Seiki Hitec CH250 Multi operation lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
1
Oferta
Oferty
Najwyższy oferent
Oferta przebita
Moja ostatnia oferta: 0,00 SEK (oferta automatyczna)
Udostępnij:
Informacje o produkcie
| Marka | Mori seiki hitec |
| Ilość | 1 |
| Numer seryjny | CH250CCD0009 |
| Rok | 2001 |
| Typ | CH250 |
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 67 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 40 tools (2 × 20)
Tool Holder Type: KV4540
Control System: Fanuc series 18i
Equipped with: Absolent ab oil mist filter, enomoto chip conveyor, coolant filter, documentation
X-axis Travel: 600 mm
Z-axis Travel: 1,000 mm
Y-axis Travel: ±75 mm
B-axis travel: 858 mm
C1/C2-axis: 0.001° increments
X/Z-axis: 30 m/min
Y-axis: 15 m/min
Machine Weight: 8000 kg
Dimensions LxWxH: 3300x1930x2290mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 4, 254-261.
Ważne informacje
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 67 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 40 tools (2 × 20)
Tool Holder Type: KV4540
Control System: Fanuc series 18i
Equipped with: Absolent ab oil mist filter, enomoto chip conveyor, coolant filter, documentation
X-axis Travel: 600 mm
Z-axis Travel: 1,000 mm
Y-axis Travel: ±75 mm
B-axis travel: 858 mm
C1/C2-axis: 0.001° increments
X/Z-axis: 30 m/min
Y-axis: 15 m/min
Machine Weight: 8000 kg
Dimensions LxWxH: 3300x1930x2290mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 4, 254-261.
Odbiór zgodnie z harmonogramem — : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Szwecja)
Odbiór zgodnie z harmonogramem — : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Szwecja)
Odbiór zgodnie z harmonogramem — : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Szwecja)
